Motorola M810 fun – pt 4

openbsd fully installed – first bootup:

Copyright Motorola Inc. 1988 - 1994, All Rights Reserved

MVME187 Debugger/Diagnostics Release Version 2.2 - 01/14/94
COLD Start

Local Memory Found =02000000 (&33554432)

MPU Clock Speed =33Mhz

Autoboot in progress... To abort hit <BREAK>
Booting from: VME187, Controller 0, Drive 10
Loading: Operating System

Volume: M88K

IPL loaded at: $009F0000

bootxx: first level bootstrap program [1.2]
>> OpenBSD/mvme88k bootsd [1.3]
2109440+65536+412552+[81528+99833]=0x2a3ffd
Start @ 0x10020
Controller Address 0xfff47000
CPU0 is associated to 2 MC88200 CMMUs
[ using 181361 bytes of bsd a.out symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.3 (GENERIC) #401: Wed Mar 19 02:03:40 GMT 2008
    root@arzon.gentiane.org:/usr/src/sys/arch/mvme88k/compile/GENERIC
real mem = 33554432 (32MB)
avail mem = 27316224 (26MB)
mainbus0 at root: Motorola MVME187, 33MHz
cpu0: M88100 rev 0xb, 2 CMMU
cpu0: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
pcctwo0 at mainbus0 addr 0xfff00000: rev 0
memc0 at pcctwo0 offset 0x43000: MCECC rev 0
nvram0 at pcctwo0 offset 0xc0000: MK48T08
cl0 at pcctwo0 offset 0x45000 ipl 3: console
osiop0 at pcctwo0 offset 0x47000 ipl 2: NCR53C710 rev 2, 66MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets
osiop0: target 1 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST39173N, 6244> SCSI2 0/direct fixed
sd0: 8683MB, 7501 cyl, 10 head, 237 sec, 512 bytes/sec, 17783240 sec total
osiop0: target 4 now using 8 bit 4 MHz 8 REQ/ACK offset xfers
st0 at scsibus0 targ 4 lun 0: <ARCHIVE, VIPER TDC 3800, =07:> SCSI2 1/sequential removable
osiop0: target 5 now using 8 bit 7 MHz 8 REQ/ACK offset xfers
st1 at scsibus0 targ 5 lun 0: <ARCHIVE, Python 28388-XXX, 5.AC> SCSI2 1/sequential removable
vme0 at pcctwo0 offset 0x40000: system controller
vme0: using BUG parameters
vme0: 1phys 0x02000000-0xefff0000 to VME 0x02000000-0xefff0000
vme0: vme to cpu irq level 1:1
vmes0 at vme0
vmel0 at vme0
ie0 at pcctwo0 offset 0x46000 ipl 3: address 08:00:3e:22:c6:37
sram0 at mainbus0 addr 0xffe00000: 128KB
softraid0 at root
boot device: sd0
root on sd0a swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0h: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
setting tty flags
starting network
starting system logger
starting initial daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
ssh-keygen: generating new DSA host key... done.
ssh-keygen: generating new RSA host key... done.
ssh-keygen: generating new RSA1 host key... done.
openssl: generating new isakmpd RSA key... done.
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Mon Apr  7 21:28:49 EDT 2008

OpenBSD/mvme88k (neptune.pissedoffadmins.com) (console)

login: