2009
03.25

qla2xxx 0001:00:04.0: Verifying loaded RISC code...
firmware: using built-in firmware ql2200_fw.bin
qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware dump...
qla2xxx 0001:00:04.0: LIP reset occured (f8f7).
scsi2 : qla2xxx
qla2xxx 0001:00:04.0:
QLogic Fibre Channel HBA Driver: 8.02.01-k7
QLogic QLA22xx -
ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma-, host#=2, fw=2.02.08 TP
qla2xxx 0001:00:04.0: LIP occured (f8f7).
qla2xxx 0001:00:04.0: LOOP UP detected (1 Gbps).
scsi 2:0:0:0: Direct-Access IBM IC35L146 CLAR146 R58A PQ: 0 ANSI: 3
scsi 2:0:1:0: Direct-Access SEAGATE ST136403FSUN36G 144A PQ: 0 ANSI: 2[/code][/pre]
[code]Linux venus 2.6.27-gentoo-r8 #1 SMP Wed Mar 25 14:44:28 EDT 2009 sparc64 sun4u TI UltraSparc III+ (Cheetah+) GNU/Linux

here is the new .config file

1 comment so far

Add Your Comment
  1. I came across your website, i think your blog is cool, keep working !