2005
07.19

dmesg from netbsd 2.0.2 vpc

NetBSD 2.0.2 (GENERIC) #0: Wed Mar 23 08:53:42 UTC 2005
jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/i386/
200503220140Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/
i386/compile/GENERIC
total memory = 199 MB
avail memory = 187 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 1008.31 MHz, id 0xf24
cpu0: features 7c0a97b
cpu0: features 7c0a97b
cpu0: features 7c0a97b
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
pchb0: fixing Idle/Pipeline DRAM Leadoff Timing
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 8 function 0: S3 Trio32/64 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80×25, vt100 emulation)
wsmux1: connecting to wsdisplay0
tlp0 at pci0 dev 10 function 0: DECchip 21140A Ethernet, pass 2.0
tlp0: interrupting at irq 11
tlp0: ^B0, Ethernet address 00:03:ff:23:0a:a1
tlp0: 100baseTX, 100baseTX-FDX
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1,5: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug ‘n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
isapnp0: ignored; resource conflict
joy0 at isapnp0 port 0x201/1
joy0: Game Port
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
Kernelized RAIDframe activated
wd0 at atabus0 drive 0:
wd0: drive supports 128-sector PIO transfers, LBA addressing
wd0: 16383 MB, 33288 cyl, 16 head, 63 sec, 512 bytes/sect x 33554304 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80×25, vt100 emulation)
wsdisplay0: screen 2 added (80×25, vt100 emulation)
wsdisplay0: screen 3 added (80×25, vt100 emulation)
wsdisplay0: screen 4 added (80×25, vt100 emulation)

The following two tabs change content below.

charlie root

VP of keeping it real / HNIC at pissedoffadmins.com
I bring the cold coffee.

Latest posts by charlie root (see all)

No Comment.

Add Your Comment