Motorola M810 fun – pt 3

view of the openbsd 4.3 initial netboot:

187-Bug>NBO 00 00
Network Booting from: VME187, Controller 0, Device 0
Loading: INSTALL.tftpboot

Client IP Address      =
Server IP Address      =
Gateway IP Address     =
Subnet IP Address Mask =
Boot File Name         = INSTALL.tftpboot
Argument File Name     = bsd.rd

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&24912, Bytes Loaded =&24912
Bytes/Second   =&24912, Elapsed Time =1 Second(s)

>> OpenBSD/mvme88k tftpboot [1.2]
Start @ 0x10020
Controller Address 0x83
CPU0 is associated to 2 MC88200 CMMUs
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.3 (RAMDISK) #16: Tue Mar 18 18:06:19 GMT 2008
real mem = 33554432 (32MB)
avail mem = 26546176 (25MB)
mainbus0 at root: Motorola MVME187, 33MHz
cpu0: M88100 rev 0xb, 2 CMMU
cpu0: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
pcctwo0 at mainbus0 addr 0xfff00000: rev 0
nvram0 at pcctwo0 offset 0xc0000: MK48T08
cl0 at pcctwo0 offset 0x45000 ipl 3: console
osiop0 at pcctwo0 offset 0x47000 ipl 2: NCR53C710 rev 2, 66MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets
osiop0: target 1 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST39173N, 6244> SCSI2 0/direct fixed
sd0: 8683MB, 7501 cyl, 10 head, 237 sec, 512 bytes/sec, 17783240 sec total
osiop0: target 4 now using 8 bit 4 MHz 8 REQ/ACK offset xfers
st0 at scsibus0 targ 4 lun 0: <ARCHIVE, VIPER TDC 3800, =07:> SCSI2 1/sequential removable
osiop0: target 5 now using 8 bit 7 MHz 8 REQ/ACK offset xfers
st1 at scsibus0 targ 5 lun 0: <ARCHIVE, Python 28388-XXX, 5.AC> SCSI2 1/sequential removable
vme0 at pcctwo0 offset 0x40000: system controller
vme0: using BUG parameters
vme0: 1phys 0x02000000-0xefff0000 to VME 0x02000000-0xefff0000
vme0: vme to cpu irq level 1:1
vmes0 at vme0
ie0 at pcctwo0 offset 0x46000 ipl 3: address 08:00:3e:22:c6:37
rd0: fixed, 4096 blocks
boot device: <unknown>
root on rd0a swap on rd0b dump on rd0b
WARNING: clock gained 19 days -- CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell? i

Welcome to the OpenBSD/mvme88k 4.3 install program.

This program will help you install OpenBSD. At any prompt except password
prompts you can escape to a shell by typing '!'. Default answers are shown
in []'s and are selected by pressing RETURN.  At any time you can exit this
program by pressing Control-C, but exiting during an install can leave your
system in an inconsistent state.

Terminal type? [vt100]

IS YOUR DATA BACKED UP? As with anything that modifies disk contents, this
program can cause SIGNIFICANT data loss.

It is often helpful to have the installation notes handy. For complex disk
configurations, relevant disk hardware manuals and a calculator are useful.

Proceed with install? [no] yes
Cool! Let's get to it.

You will now initialize the disk(s) that OpenBSD will use. To enable all
available security features you should configure the disk(s) to allow the
creation of separate filesystems for /, /tmp, /var, /usr, and /home.

Available disks are: sd0.
Which one is the root disk? (or 'done') [sd0]
Initial label editor (enter '?' for help at any prompt)
> p d
device: /dev/rsd0c
type: SCSI
disk: SCSI disk
label: ST39173N
bytes/sector: 512
sectors/track: 237
tracks/cylinder: 10
sectors/cylinder: 2370
cylinders: 7501
total sectors: 17783240
free sectors: 0
rpm: 7177
The following two tabs change content below.

charlie root

VP of keeping it real / HNIC at pissedoffadmins.com
I bring the cold coffee.

Latest posts by charlie root (see all)

No Comment.

Add Your Comment